Name: Playbook - Ayo Bash - Pull day all round - October 23 2024
Uploaded: 2025-01-18T12:12:34.732Z
Duration: 120 min
Description: Pull day all round - October 23 2024

This pull routine is dedicated to enhancing your upper body pulling strength. This routine targets muscles like your back, biceps, and rear shoulders. Key exercises include pull-ups, rows, and lat pulldowns, which engage multiple muscle groups simultaneously. Isolation movements like bicep curls further isolate and develop specific muscles. Maintain proper technique, increase resistance gradually, and remember to warm up and cool down for an effective pull day workout.

1. Find a Suitable Pull-Up Bar: Locate a sturdy horizontal bar that can support your body weight. This could be a pull-up bar at the gym or a secure bar at a park or home gym setup.
2. Grip: Approach the pull-up bar and choose your grip:

•	Overhand Grip: Palms facing away from you, slightly wider than shoulder-width apart. This targets the upper back and lats.
•	Underhand Grip: Palms facing you, hands closer together. This emphasizes the biceps and lower lats.
•	Neutral Grip: Palms facing each other, often using parallel bars. This engages both the biceps and the lats.

4.	Hang: Stand or jump up to grip the bar, arms fully extended. Your body should be hanging freely beneath the bar.
5.	Position Your Body: Engage your core muscles to stabilize your body. Keep your legs together and slightly bend your knees. Cross your ankles if it helps with stability.
6.	Initiate the Pull-Up: Begin the pull-up by retracting your shoulder blades and pulling your chest toward the bar. Focus on using your back and arm muscles to lift your body.
7.	Chin Over the Bar: Continue pulling until your chin is above the bar or as close to it as possible. Keep your elbows pointed downward, not flaring out to the sides.
8.	Lower Slowly: Lower your body back down to the starting position in a controlled manner. Avoid swinging or using momentum. This eccentric phase of the exercise is crucial for muscle growth.

Hanging Pull Ups or Assisted Pull Ups

1.	Stand with your feet shoulder-width apart, holding a dumbbell in each hand with a neutral grip (palms facing your body).
	2.	Keep your core engaged and maintain a straight posture with your shoulders back.
	3.	Lift your shoulders straight up toward your ears in a controlled motion, avoiding any rotation or forward movement.
	4.	Squeeze your shoulder blades together at the top of the movement for an extra contraction.
	5.	Hold the raised position for a brief moment to maximize muscle engagement.
	6.	Lower the dumbbells back down slowly, resisting gravity to work your muscles throughout the entire range of motion.

Dumbbell shoulder shrugs

1.	Set Up the Barbell: Begin by setting up a barbell in a power rack or on a squat rack. Position the bar at knee height or slightly below. Use a barbell with an appropriate weight for your strength level.

	2.	Proper Foot Placement: Stand in front of the barbell with your feet hip-width apart. Your toes should be under the barbell, and your shins should be very close to it.

	3.	Grip the Bar: Bend at your hips and knees to reach down and grip the barbell with an overhand grip (palms facing you) or a mixed grip (one palm facing you, one palm facing away). Choose a grip that feels comfortable and secure.

4.	Engage Your Core: Before lifting, engage your core muscles to stabilize your spine and protect your lower back.

	5.	Lift the Bar: With a strong, controlled motion, stand up by extending your hips and knees. As you stand, keep the barbell close to your body to minimize strain on your lower back.

	6.	Fully Extend: Stand up tall with your shoulders back and chest out. At this point, the bar should be at around knee height or slightly above it.

7.	Hold the Position: Hold the top position for a brief pause, focusing on squeezing your shoulder blades together and engaging your upper back and traps.

	8.	Lower the Bar: To complete the repetition, slowly lower the barbell back down to the starting position, maintaining control throughout the descent.

Barbel Rack Pulls

Equipment Needed:

	•	Landmine attachment (or you can anchor a barbell in a corner)
	•	Barbell
	•	Weight plates
	•	Handles or V-bar attachment (optional)


	1.	Anchor the Barbell:
	•	If using a landmine attachment, secure one end of the barbell in the attachment.
	•	If not using an attachment, place one end of the barbell into a corner of a room or against something stable to prevent it from moving.
	2.	Load the Barbell:
	•	Add the desired amount of weight plates to the free end of the barbell.
	•	Ensure the weight is securely fastened with collars if necessary.
	3.	Grip the Barbell:
	•	Stand over the barbell with your feet about shoulder-width apart.
	•	Bend at the hips and knees to lower your torso.
	•	Grasp the barbell with both hands, using either a V-bar attachment or directly grabbing the bar (just below the weight plates).

Execution:

	4.	Starting Position:
	•	Keep your back straight, chest up, and core engaged.
	•	Your torso should be leaning forward at about a 45-degree angle.
	5.	Rowing Motion:
	•	Pull the barbell towards your lower chest/upper stomach.
	•	Focus on squeezing your shoulder blades together at the top of the movement.
	•	Keep your elbows close to your body throughout the exercise.
	6.	Lowering the Bar:
	•	Slowly lower the barbell back to the starting position, fully extending your arms.
	•	Maintain control and avoid letting the weight drop quickly.

Landmine Rows

1.	Preparation and Safety:
	•	Start by setting up the barbell on a squat rack at about hip height.
	•	Load an appropriate amount of weight onto the bar.
	•	Stand with your feet shoulder-width apart, toes pointing forward, and the barbell in front of you.
2.	Grip:
	•	Bend at your hips and knees to lower your torso towards the bar.
	•	Reach down and grab the bar with an overhand grip, hands slightly wider than shoulder-width apart.
3.	Setup:
	•	Straighten your back to maintain a neutral spine, keeping it in a slight arch.
	•	Engage your core for stability.
4.	The Pull:
	•	Stand up and lift the barbell off the rack.
	•	Step back a few steps to create enough space to perform the exercise.
	•	Keep your knees slightly bent but stable throughout the movement.
5.	Execution:
	•	While maintaining a straight back and looking forward, hinge at your hips and bend forward at about a 45-degree angle. Your back should remain flat, and your chest should be up.
	•	Let the bar hang directly in front of you, arms fully extended.
	•	Inhale and initiate the movement by pulling the bar towards your lower ribcage. Keep your elbows close to your body.
	•	Squeeze your shoulder blades together at the top of the movement to engage your upper back muscles.
6.	The Descent:
	•	Exhale as you lower the barbell back to the starting position, maintaining control and keeping your back straight throughout the descent.

Bent Over Rows ( 3x neutral grip & 3x reverse grip)

- Choose the Neutral Grip Handle: Attach a neutral grip handle (often shaped like two parallel bars or a V) to the pulldown machine’s cable. Ensure that it’s securely fastened.
- Sit Down: Take a seat on the machine’s bench, keeping your back straight and your feet flat on the floor. Place your thighs under the knee pad, which should sit just above your knees.
- Adjust the Leg Support: Adjust the thigh pad height to fit comfortably over your legs, providing stability as you perform the exercise.
- Grip the Handles: Reach up and grab the neutral grip handles with your palms facing each other (hands in a handshake position). Your hands should be slightly wider than shoulder-width apart.
- Position Your Torso: Sit with an upright posture, chest up, and shoulders back. Maintain a slight arch in your lower back.
- Engage Your Core: Before starting the exercise, engage your core muscles to stabilize your spine and prevent excessive leaning backward.
- Begin the Pull: With a controlled motion, pull the handles down towards your upper chest or just below your chin. Focus on using your lats to initiate and control the movement.
- Squeeze Your Lats: At the bottom of the movement, when the handles are closest to your chest, squeeze your lats and hold the contraction for a brief moment.
- Return to Starting Position: Slowly release the tension on the handles and allow them to return to the fully extended position, maintaining control throughout the ascent.

Neutral grip lat pulldown

1.	Sit down at a lat pulldown machine and adjust the thigh pads to secure your legs in place.
	2.	Grab the close-grip handle with your palms facing you and hands positioned closer than shoulder-width apart.
	3.	Keep your back straight and chest up as you pull the bar down towards your upper chest, engaging your lats.
	4.	Focus on squeezing your shoulder blades together at the bottom of the movement to fully activate your back muscles.
	5.	Control the ascent of the bar as you let it go up, resisting the weight to maintain tension on your muscles.
	6.	Aim for 3 sets of 10-12 repetitions, adjusting the weight to a challenging but manageable level.
	7.	Ensure a full range of motion by allowing your arms to fully extend at the top and pulling the bar down until it almost touches your chest.

V-bar close grip lat pulldown

1.	Setup:
	•	Locate a back extension bench or Roman chair at your gym.
	•	Adjust the bench to your body size, ensuring that your hips and lower abdomen are just above the pad when you lie face down.
2.	Climbing onto the Bench:
	•	Approach the back extension bench and position yourself with your feet flat on the floor.
	•	Make sure your ankles or calves are secured under the leg pads, which help stabilize your lower body.
3.	Starting Position:
	•	Cross your arms over your chest or place your hands behind your head (whichever is more comfortable for you).
	•	Keep your head in a neutral position with your spine aligned.
4.	The Extension:
	•	Slowly lower your upper body towards the floor by hinging at your hips. Keep your back straight as you do this.
5.	The Lift:
	•	Using your lower back muscles, glutes, and hamstrings, lift your upper body back up until your torso is in line with your legs or slightly above parallel to the floor.
6.	Control and Breathing:
	•	Exhale as you rise back up.
	•	Inhale as you lower your upper body.
7.	Repetitions:
	•	Perform the desired number of repetitions (usually 3-4 sets of 10-15 reps).
8.	Rest and Repeat:
	•	After each set, carefully release your feet from the leg pads.
	•	Take short rests between sets to allow for recovery.
9.	Cool Down:
	•	Stretch your lower back and hamstrings after completing your sets.

When performing back extensions, it’s essential to maintain a slow and controlled motion to prevent straining your lower back.

Weighted Back Extensions

In this circuit, you are going to go back and forth between these two exercises. 1 round of these two exercises (while they may seem as 2 sets) counts as one set - as they operate as a circuit, or superset.

1.	Follow steps 1 and 2 as mentioned above.
	2.	Hold a barbell with an underhand grip, hands shoulder-width apart, and let it hang in front of your thighs with your arms fully extended.
 	3.	Initiate the curl by flexing your elbows while keeping your upper arms stationary.
	4.	Lift the barbell towards your shoulders, exhaling as you do so.
	5.	Squeeze your biceps at the top of the movement.
	6.	Lower the barbell back to the starting position, inhaling as you do so.
	7.	Repeat the movement for the desired number of repetitions, maintaining proper form.

Barbel Bicep Curls

1.	Select the Right Dumbbells: Choose a pair of dumbbells with an appropriate weight for your fitness level and goals. Start with a weight that allows you to perform the exercise with proper form.

	2.	Stand Up Straight: Stand with your feet shoulder-width apart. Keep your back straight, shoulders relaxed, and core engaged.

	3.	Hold the Dumbbells: Hold a dumbbell in each hand with an underhand grip (palms facing forward), and let your arms hang fully extended by your sides. Your elbows should be close to your torso.

4.	Initiate the Curl: Start the movement by flexing or engaging your elbows while keeping your upper arms stationary. Slowly lift the dumbbells towards your shoulders, exhaling as you do so.

	5.	Squeeze at the Top: At the top of the movement, when your forearms are close to or touching your biceps, pause for a brief moment and squeeze your biceps.

	6.	Lower the Dumbbells: In a controlled manner, lower the dumbbells back to the starting position, inhaling as you do so. Keep your back straight and avoid swinging or using momentum.

	7.	Repeat: Perform the desired number of repetitions. Aim for 8-12 reps for muscle-building purposes. And go up in desirable weight for each set.

	8.	Progression: As you become stronger, you can gradually increase the weight of the dumbbells to continue challenging your biceps.

Pull day all round - October 23 2024

More workouts from Ayo Bash