Name: Playbook - Bryanna Williams - Quads Work
Uploaded: 2021-08-31T20:51:14.031Z
Duration: 75 min
Description: Quads Work

"- Using a leg press machine, sit down on the machine and place your legs on the platform directly in front of you at a less-than-shoulder-width narrow stance. Your feet should be around 3 inches or less apart. 
- Lower the safety bars holding the weighted platform in place and press the platform all the way up until your legs are fully extended in front of you. Tip: Make sure that you do not lock your knees. Your torso and the legs should make a perfect 90-degree angle. This will be your starting position.
- As you inhale, slowly lower the platform until your upper and lower legs make a 90-degree angle.
- Pushing mainly with the heels of your feet and using the quadriceps go back to the starting position as you exhale.
- Repeat for the recommended amount of repetitions and ensure to lock the safety pins properly once you are done. You do not want that platform falling on you fully loaded

Leg Press (Quad Dominant)

- Begin standing with your feet shoulder width apart and a barbell across your upper back.
- Step forward with one leg, flexing the knees to drop your hips. Descend until your rear knee nearly touches the ground. Your posture should remain upright, and your front knee should stay above the front foot.
- Drive through the heel of your lead foot and extend both knees to raise yourself back up.
- Step forward with your rear foot, repeating the lunge on the opposite leg.

Barbell Walking Lunge

- Select the weight you would like to use, then adjust back pad so that when seated, your knees align with the machine’s axis of rotation.
- Comfortably position shin pad and apply light pressure.
- Grasp handles and stabilize body.
- Push forward and up against the pad until your legs are straight in front of you.

Leg Extension

Heel Elevated Front Squat

Quads Superset

- Hook a leather ankle cuff to a low cable pulley and then attach the cuff to your ankle.
- Face the weight stack from a distance of about two feet, grasping the steel frame for support.
- While keeping your knees and hips bent slightly and your abs tight, contract your glutes to slowly ""kick"" the working leg back in a semicircular arc as high as it will comfortably go as you breathe out. Tip: At full extension, squeeze your glutes for a second in order to achieve a peak contraction.
- Now slowly bring your working leg forward, resisting the pull of the cable until you reach the starting position.
- Repeat for the recommended amount of repetitions.
- Switch legs and repeat the movement for the other side.

Cable Glute Kickbacks

- Sit on the machine and place your toes on the lower portion of the platform provided with the heels extending off. Choose the toe positioning of your choice (forward, in, or out) as per the beginning of this chapter.
- Place your lower thighs under the lever pad, which will need to be adjusted according to the height of your thighs. Now place your hands on top of the lever pad in order to prevent it from slipping forward.
- Lift the lever slightly by pushing your heels up and release the safety bar. This will be your starting position.
- Slowly lower your heels by bending at the ankles until the calves are fully stretched. Inhale as you perform this movement.
- Raise the heels by extending the ankles as high as possible as you contract the calves and breathe out. Hold the top contraction for a second.
- Repeat for the recommended amount of repetitions.

Quads Work

More workouts from Bryanna Williams